FauxClock App recommended Settings"
CPU Control
- Max clock - GHz 2.1 GHz for performance, 1.7 GHz for battery
- Min clock - MHz 162 MHz for both
- CPU Governor - Ondemand for performance, Intellidemand for battery
- mpdecision - Off
- Snake Charmer - OFF for performance, On for Battery
- Eco Mode - Off for performance, On for battery
- Set On Boot - On
SOC Control
- Set On Boot - On
- C0 - On
- C1 - On
- C2 - On
Voltage Control
- Set On Boot -
- Global CPU Voltage - Your preference
intellidemand gov control
- Up Threshold - 75 for both
- Boost Frequency - 0 for both
- Two Phase Freq - 1350000 for both
- Sampling Rate - 50000 for both
- Optimal Freq - 1566000 for both
- Synchro Freq - 702000 for both
- Set On Boot - On
GPU Control
- GPU Governor - ondemand for both
- GPU Clock - 487Mhz for performance and 320Mhz for battery
- GPU Vsync Toggle - On for both
- Set On Boot - On for both
I/O Scheduler Control
- I/O Scheduler (eMMC) - FIOPS for both
- Readhead Size (eMMC) - 1024 for both
- Set On Boot - On for both
Misc Control
- Dynamic File Sync - On for both
- TCP Congestion Control - Westwood for both
Vibration Control
- Set On Boot - On for both
- Vibration Control - Your own Preference
Z-Control
- Set On Boot - On for both
- ZRAM Disk size - 150~200 Megabytes (or 50 MB when disabled)
- ZRAM Enable/Disable - Enable if you mult-task often
- Clear VFS Cache After Boot - On
- Auto FS Writeback Delay Mode - On
- Swappiness - 100% if ZRAM enabled, 0% if disabled
- VFS Cache Pressure - 100% if ZRAM enabled, 150% if disabled
- Dirty Ratio - 20% for both
- Dirty Background Ratio - 5% for both
http://forum.xda-developers.com/showthread.php?t=2255900
沒有留言:
張貼留言